LevelOne GSW-2600TXM Manual do Utilizador descarregar pdf (Página 106)

106

3. Web Interface

3.1.Web-Based Configuration and Monitoring

In addition to the menu-driven system configuration program, this switch also provides

an embedded HTTP Web agent. Using a Web browser you can configure the switch

and view statistics to monitor network activity. The Web agent can be accessed by any

computer on the network using a standard Web browser (Internet Explorer 4.0 or above,

or Netscape Navigator 4.0 or above).

Prior to accessing the switch from a Web browser, be sure you have first performed the

following tasks:

1. Configure it with a valid IP address and subnet mask (for Layer 2 mode) using an

out-of-band serial connection or BOOTP protocol (Appendix A). Provide a default

gateway for Layer 2 operation (chapter 2 “IP Configuration”) or a default route for

multilayer operation (chapter 2 ”Configuring the Default Route”).

2. Set a user name and password using an out-of-band serial connection (chapter 2

“User Log-in Configuration”). Access to the Web agent is controlled by the same

user name and password as the onboard configuration program.

Note:

If the path between your management station and this switch does not pass

through any device that uses the Spanning Tree Algorithm, then you can set the

switch port attached to your management station to Fast Forwarding (chapter 3

“Configuring the STA for Ports”) to improve the switch’s response time to

management commands issued through the Web interface.

After you enter the user name and password, you will have access to the system

configuration program illustrated by the following menu hierarchy:

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 199 200

Sem comentários

LevelOne GSW-2600TXM Manual do Utilizador Página 106