Levelone IED-1020 Manual do Utilizador descarregar pdf (Página 60)

click the “OK” button to finish TCP Client Setting.

Apply the above settings to all serial ports: Click this button to apply the above settings to

all serial ports.

4. UDP

 Step 1: Xport mode

Choose “UDP” from the “Step 1: Xport mode”.

Fig 79. UDP

 Step 2: Serial port settings

Baud rate: Click “Baud rate” drop-down menu to select Baud rate 50 ~ 460800bps from the

“Baud rate” drop-down list for the serial port. The default Baud rate of the serial port is

9600bps.

Data bits: Click “Data bits” drop-down menu to select Data bits 5, 6, 7, or 8 from the “Data bits”

drop-down list for the serial port. The default Data bits of the serial port is 8 bits.

Stop bits: Click “Stop bits” drop-down menu to select Stop bits 1 or 2 from the “Stop bits”

drop-down list for the serial port. The default Stop bits of the serial port is 1 bit.

Parity: Click “Parity” drop-down menu to select Parity None, Even, Odd, Mark, or Space from

the “Parity” drop-down list for the serial port. The default Parity of the serial port is None.

Flow control: Click “Flow control” drop-down menu to select Flow control None, Hardware, or

Software from the “Flow control” drop-down list for the serial port. The default Flow control of

the serial port is None.

Mode: Click “Mode” drop-down menu to select Mode RS232, RS422, or RS485 from the

“Mode” drop-down list for the serial port. The default Mode of the serial port is RS232.

 Step 3: Protocol timeout setting

Support protocol timeout auto-detect: Check this option to support protocol timeout

auto-detect. The Serial Device Server will automatically test the TCP connection to remote

host. If the TCP connection is idle, the TCP connection will be closed and the port will be freed

for other hosts.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 71 72

Sem comentários

Levelone IED-1020 Manual do Utilizador Página 60