LevelOne WAP-6002 Manual do Utilizador descarregar pdf (Página 10)

Chapter 2

Installation

This Chapter covers the physical installation of the Wireless Access Point.

Requirements

Requirements:

 TCP/IP network

 Ethernet cable with RJ-45 connectors

 Installed Wireless network adapter for each PC that will be wirelessly connected to the

network

Procedure

1. Select a suitable location for the installation of your Wireless Access Point. To maximize

reliability and performance, follow these guidelines:

 Use an elevated location, such as wall mounted or on the top of a cubicle.

 Place the Wireless Access Point near the center of your wireless coverage area.

 If possible, ensure there are no thick walls or metal shielding between the Wireless

Access Point and Wireless stations.

Figure 5: Installation Diagram

2. Use a standard LAN cable to connect the "LAN" port on the Wireless Access Point to a

10/100BaseT hub/switch on your LAN.

3. Connect the supplied power adapter to the Wireless Access Point and a convenient power

outlet, and power up.

4. Check the LEDs:

 The Power LED should be ON.

 The LAN and Wireless LEDs should be ON.

For more information, refer to Front Panel LEDs in Chapter 1.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 73 74

Sem comentários

LevelOne WAP-6002 Manual do Utilizador Página 10