LevelOne IPS-0008 Manual do Utilizador descarregar pdf (Página 17)

The following procedure describes the basic steps needed to set up the

IPS-0008:

1. To set up the hardware, connect power to the power inlet and

output devices to the power outlets. Connect digital outputs to the

digital I/O ports, and an EMD to the console port.

2. To configure the IPS-0008, you can use the console or WAN port.

Connect the IPS-0008 to a console and a WAN to enable its

configuration through the console or browser menu.

3. After connecting to a console, use a console application such as

Tel- net or HyperTerminal to access the console menu. Select the

System Group submenu under the IPS-0008 Configuration to set

up the IP address and the system date/time. This IP address will be

used while accessing the web interface to configure the IPS-0008

parameters.

4. After connecting to WAN, open a browser from a PC in the network

and use the IPS-0008 IP address specified through the console

menu to open the web interface for system configuration.

The following sections provide instructions about how to make various

connections.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 42 43

Sem comentários

LevelOne IPS-0008 Manual do Utilizador Página 17