LevelOne FCS-5052 Manual do Utilizador

FCS-5052 3-Megapixel Day/Night PoE Outdoor Network Camera User’s Manual H/W: V1.0

6 Camera Connection Basic Connection (Without PoE) 1. To attach external devices, such as sensors, alarms, speaker and microphone, connect them to t

7 B. If using a non-PoE Switch 1. Use a standard RJ-45 cable to connect the camera to a PoE Injector. 2. Use a standard RJ-45 cable to connect the

8 System Requirements Operating System: Microsoft Windows XP Home Edition SP2 Microsoft Windows XP Professional SP2 Computer: IBM PC/AT Compa

9 Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to

10

11

12 2. Do not check the box if user would like to check the hardware installation settings. Otherwise click “Skip the hardware installation” to skip

13 3. Select the Network Camera from the survey list and enter the user name and password. The user name and password are assigned as “

14 4. Setting the Network Camera IP address. User can either select simple mode or professional mode for network camera IP setting. If simple mode

15 5. Please make sure the internet connection is ready then start to do the internet discovery, otherwise click “Skip” to finish the

Product name: FCS-5052 Release Date: 2013/04/16 Manual Revision: V1.0 Default Settings IP Address DHCP Username admin Password admin

16 6. After finish setting, the connection successful or fail showed. If connection failed, user can either try again or quit the installation. Us

17 Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately after software installation o

18 Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and pass

19 Live View Live View is the default page that opens when accessing the camera. Live video is displayed directly in the browser window.  Stream1~

20 better video quality. The downside of using this protocol is that the quality of its real-time effect is less than that of the UDP protocol. UDP -

21  Motion Detection - Enable the motion detection alert function.  Mute - Turn off the sound.  Talk - To communicate through the camera using

22 Configuration Click <Configuration> on the main page to change the camera settings pages. NOTE - Only Administrators can access the Confi

23 Profile - Up to five profiles can be created for different lighting environments. Day and night are default profiles and users can create up to th

24 Profile Management: Profiles can be scheduled to change at scheduled times or under different lightening changes. Always - Select Always to us

25 Schedule – Select Schedule to schedule specific time periods for different profiles. Digital Input - Select Digital Input to have the profile m

Table of Contents Package Contents ... 1 Hard

26 Video The Network Camera offers several separate streams for different viewing options.

27 Stream 1 ~ 3 Video Codec - The Network Camera offers three choices of video codec standards for real-time viewing: H.264, MPEG-4 and MJPEG. Vide

28 Text - To make a note about the camera, check “Enable” and select the display position from the drop-down menu. Enter a video description in the t

29 Audio The administrator can set up several streams for the camera for different viewing devices. The administrator can enable or disable the audio

30 Privacy Mask Control The camera is equipped with a privacy feature which allows users to mask the whole or partially of the camera’s live view.

- 31 -

- 32 -

- 33 -

- 34 -

- 35 -

HTTP Settings ... 48 Digital Output (DO) ...

- 36 -

- 37 -

- 38 -

- 39 -

- 40 -

- 41 -

- 42 -

- 43 -

- 44 -

- 45 -

1 Package Contents  FCS-5052  Camera Bracket  Power Adapter  Quick Installation Guide  CD Manual/Utility

- 46 -

- 47 -

- 48 -

- 49 -

- 50 -

- 51 -

- 52 -

- 53 -

- 54 -

- 55 -

2 Hardware Device Appearance

- 56 -

- 57 -

- 58 -

- 59 -

3 DI/DO Cable Pin No. Function Pin 1 5V Pin 2 DO Pin 3 DI Pin 4 GND Hardware Reset The Reset Button can be used to reboot the camera or restore

4 Hardware Installation WARNING: Do not mount the camera on a soft material or uneven surface. 1. Choose the location on the wall to place the camer

5 3. Adjust the angle of the bracket so the camera is facing the desired surveillance area then fasten the screw.