LevelOne NVR-1204 Guia de Instalação descarregar pdf (Página 124)

Network Video Recorder Administrator’s Manual

124

Disk Management

NVR keeps the recordings on SATA hard disks installed in it. Whenever recording is taking

place, NVR writes data to one of the disks, and switch to the other as the original one is full.

Once the available space of the whole system is less than the reserved size, NVR will start

deleting the oldest file to make the amount of space allowing each active channel to record

for another 10 minutes.

You may observe the disk memory and recording status on Storage page.

Go to Setup page  System tab Storage. The connected storage devices will be shown

in the Storage Device list.

Format Hard Disks

Select a disk and click “Format”.

You may execute disk formatting toward a newly-installed disk. You should follow the

installation procedures (refer to Install the Hard Disks on page 21 ) to format the disks before

NVR system start carrying out the surveillance task, for a disk that is not in NVR file system

format is not ready for recording. Please note that the system will stop recording during the

disk formation.

If you have to format a disk having been recording for a while, it is suggested that you export

important video and system log in advance.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 135 136

Sem comentários

LevelOne NVR-1204 Guia de Instalação Página 124